Shandong Yamanjia Biomass Technology Co., Ltd.
Shandong Yamanjia Biomass Technology Co., Ltd.

What Kind of Floor is Best to Install Underfloor Heating?

Ⅰ. The cork floor just meets the floor heating requirements for the floor

The installation of floor heating has higher requirements on the floor, and the quality of the floor directly determines the heating effect of floor heating. So, what kind of floor is suitable for floor heating? Solid wood composite floor, laminate floor, ceramic tile, which one is the most suitable.

The floor suitable for floor heating must meet four major elements: floor heating conductivity, dimensional stability, anti-fouling and environmental protection and durability. And cork flooring just fits this trait. Its production standards and construction techniques all adopt the latest international popular techniques, and strive to quantify the four elements, and formulate the quality inspection specifications for floor laying and warranty period to quantify the technical indicators of laying and maintenance.

Ⅱ. The benefits of cork floor as floor heating

1. Can effectively release internal stress

Whether the floor can be geothermally depends on whether the floor can effectively release the internal stress brought by the temperature change to the floor. What kind of floor is good for installing floor heating? Generally, the structure of the floor is fibrous, such as solid wood composite floor and laminate floor. It is easy to cause deformation of the floor. And you see that the cork floor is granular. After being heated, the heat will be dissipated and decomposed and cancel each other out.

2. High temperature resistance and strong deformation resistance

The temperature of the heat source of geothermal heating is generally around 60 degrees Celsius, and the temperature difference from 0 to 60 degrees Celsius will have extremely high requirements on the stability of the floor, while the cork floor can withstand the temperature difference from minus 60 degrees Celsius to zero plus 80 degrees Celsius.

3. Fast thermal conductivity

After the general floor is installed, the total thickness is 10-14 mm for laminate flooring, 15-20 mm for general parquet, and only 4-6 mm for cork floor, which has fast conductivity and can save energy.

4. Low formaldehyde emission

Generally, the floor may not exceed the standard at room temperature. But in a geothermal environment, the higher the temperature, the higher the amount of formaldehyde released. The cork floor has passed the previous inspections by the national authoritative departments, and the formaldehyde emission in each inspection is below 0.2 mg/L, reaching the E0 level standard, and the lowest can reach 0.05 mg/L, which is far lower than the E0 level standard. This is unmatched by parquet.

5. Three-point floor seven-point installation

The cork wood floor pays attention to "three-point floor and seven-point installation", especially the installation of geothermal floor is very critical. The cork floor adopts the current popular self-leveling cement paste technology in Europe and America, which is more stable, quiet, moisture-proof and antibacterial than other construction processes.

Related Products

Related Cork Flooring & Cork Wall Tiles Blogs

  • +86-17863660368
  • yamanjia_7370888@126.com
  • 5 Jixiang Road, economic development zone, Wenshang County, Shandong Province